- Construction: All wet parts coming in contact with liquid pumped is either lined on cast Iron or made appropriate corrosion resistance Non-Metallics.
- Drive: Pumps are mainly arranged from a coupling drive or V belt drive on request
- Impeller: Semi-Open type rubber-lined Impeller handles maximum solid particles without a load on the pump’s Efficiency
- Shaft: EN-9 OR SS 316
- Sleeve: Alloy-20, Ceramic, FRP
- Ball Bearing: Inboard bearing is pressed on shaft (En-9 / SS 316)
- and is free to float axially in a frame that carries radial load only. Outboard bearing is shouldered red and locked on a shaft with locknut and washer and in bearing housing to carry radial and an unbalanced thrust load. All bearing fits are precision bored.
- Gland Packing: Pumps are fitted with gland packing compatible with the liquid to be handled.
APPLICATION
- Hydraulic Acid at all Concentrations
- Dilute Sulphuric Acid
- Pigment Slurries
- Lime Slurry / Milk of Lime
- Phosphoric Acid Solutions
- Paper Stock
- Paper Stock
- Industrial effluents
- Ore Slurries
- Acidic Slurries
- Abrasive Slurries
- Sea Water
OPERATING RANGE
- 10 M3/hr – 40 M3/hr
- Head-Up to 20 meters
- Liquid Column
(Higher Models Available on Request.)
For Abrasive Liquids:
- Suspension with fine abrasive solids
- Up to 3 mm slurries, Calcium Hypochlorite, Potassium Hypochlorite, Copper Ox chloride,
- Iron Ore Slurry, Coal Ash Slurry, River-Bed Gravel Abrasive Silt.
PTFE LINED PUMPS
FLUORO-POLYMER LINED-PVDF/FEP/PFA LINED These pumps are designed for handling of most served industrials duties & available in a variety of lining materials to suit different requirements involving highly aggressive media at elevated temperature. This pump has excellent chemical as well as temperature resistance similar to PTFE & is cost-effective alternative to expensive metals & alloys like hast alloy, tantalum, nickel, etc.
The wet parts of the pumps are lined with following fluoro-polymers.
- PVDF (Polyvinylidene fluoride)
- FEP(Fluorinated ethylene propylene )
- PFA (Perfluoroalkoxy)
OPERATING RANGE
- Permits applications all aggressive, corrosive or toxic media
- Up to 200°c with or without abrasive slurries
- Max Head: Up to 100 MWC
- Max Capacity: Up to 200 M3/hr