Vertical Centrifugal process pump can be used in any installation and especially where the saving of space is an important factor or where liquid is difficult to lift because of nature like temp, corrosiveness etc these pumps are designed for use where the liquid to be handled is of highly corrosive Nature or where non – adherence of product or zero metallic contamination is must. These pumps are equally ideal for continuous or intermittent service for handling Corrosive as well as ultra-pure chemicals without fear of corrosion or contamination.
APPLICATION
- Pollution Control
- Filtration
- Transferring Corrosive Chemicals
- Slurries
- Biogas plants
- Sewage
- M.S Vertical pump are used for the transfer of sulphuric acid 98 %. OLUM, CLOTO, NEPTHA
- Phosphoric Acid Plant. H, PO, H2SIFs, H2SO4, HF and Their Mixtures
- Gas washing plant
- Scrubbed liquids containing, F, Cl, SO2, Ammonia
- Water treatment plant
- Any types of acidic water lifting
- Wastewater treatment plant
HIGH-TEMPERATURE SERVICES
The maximum working temperature is 110oC / 200oC.
LENGTH
Pump lengths available from 1′ to 12′ with flow rate up to 50M3/h or 120-meter head. Higher capacities and head available on request and even multistage pump can be also made.
MODELS
Available in the conventional or tailor-made configuration. Several models such as suction extension with float switch, duplex pumping station with float switch (auto on/off the device) are also available.